body{-moz-user-select:none;}

160 mm PPR Electrofusion Welding Machine

Electrofusion Welding Machine is the special connecting device used to electrofusion connect polythene pressure and non-pressure conduit. It’s a multipurpose low voltage electrofusion machine capable of using any brand of HDPE , PP , PP-R couplers avaiable in the market for transport of gas , water and other fluids. PP-R up to OD 160 mm , PP and HDPE up to OD 200 mm. 


  • Input Volt:: AC 200-240
  • Input Frequency:: 50-60 Hz
  • Output Current:: DC 2-60A
  • Nominal Power:: 2500 W
  • Record Stored:: 3200 PCS
  • Weldable Material:: PP-R/PP/HDPE
  • Weight Net Machine :: 8 kgs
  • Product Detail

    Product Tags

    This Electrofusion Welding Machine Designed by our team HANGZHOU FUYI TOOLS CO.,LTD. The electrofusion welder with a patent. 

    FYEFM200 Electrofusion Welding Machine using advanced PID control technology, making the device output more stable and reliable. Large size LCD screen as man-machine interface, support Chinese / English / Russian/ Spanish languages.
    FYEFM200 Electrofusion Welding Machine is the special connecting device used to electrofusion connect polythene pressure and non-pressure conduit. It’s a multipurpose low voltage electrofusion machine capable of using any brand of HDPE,PP,PP-R couplers avaiable in the market for transport of gas , water, and other fluids. PPR up to OD 160mm. PP and HDPE up to OD 200mm.
    Parameters & Feature

    Control characteristics Control mode Constant voltage/ current
    Electric quantity constant precision ≤±0.5%
    Time control precision ≤±0.1%
    Temperature measuring precision ≤1%
    Scan bar code Scan 24 bit bar code conform to ISO 13950-2007
    Ambient Ambient temperature -20~50ºC
    Storage temperature -30~70ºC
    Humidity 20%~90%RH,no condensation
    Vibration <0.5G, no violent vibration and impact
    Altitude <1000m AMSL, when≥1000m de-rate in accordance with GB/T3859.2-2013

    electrofusion welding machine

    Key-press Name Function description
    ON/OFF OFF/ON ON meaning Open ,OFF meaning Close
    OK Confirmation Selected/Confirm/Go to next window/Welding Start
    STOP STOP Stop/Cancel/Returns to the previous window
    + Increase Menu up / Data increases
    Tab→ option(Decrease) Menu down / Data decreases
    Text Printer/ Scanner For inserting scanner / printer

     
    One set Electrofusion Machine Include as following 
    1. One Electrofusion Machine 
    2. Bag 
    3. Pipe Scraper 
    4. Barcode Reader 
    5. Print (Option)
    新
    Alarm Codes And Their Meaning
     

    Warning ! The welding cycle is interrupted whenever on error code is displayed. The interruption may cause the deterioration of the material being welded.
    In no event shall we are liable for any direct , indirect, incidental or consequential damages of any kind whatsover with respect to the use of pipes/fittings/couplers previously involved iin welding cycles resulting in error codes.
    Barcode:
    Error #1-24 ————–Error parsing bar code
    Probable cause:
    The X parameter in bar code cann’t be parsed or not applicable
    Solution: Contact with couplers supplier
    Error #25————–Not welding bar code
    Probable Cause: Scan not welding bar code
    Solution: Rescanning welding bar code, make sure the laser beam aims at the welding bar code.
    Pre-welding Inspection 
    Error # 31 ————– Unableto output the specified voltage( specified voltage is too high)
    Error # 32 ————– Unableto output the specified current ( specified current too heavy )
    Error # 33 ————– Unableto output the specified voltage( specified voltage is too low)
    Error # 34 ————– Unableto output the specified current ( specified current too low)
    Probable Cause:  1. The input of welding parameters is incorrect.  2.Welding parameters are out of range
    Solution: 1. Modifying welding parameters.  2. Using the correct electrofusion fittings.

    Error # 37————–Load short circuit
    Probable Cause: 1. Electrofusion Fitting is damage.  2.Connection Short Circuit.
    Solution: 1.Repeat the welding with another electrofusion fitting. 2. Troubleshoot the short circuit of connecting cable.
    Error #38————-Unconnected Load
    Probable Cause: 1.Electrofusion Fitting is damage. 2. Loose connection cable. 3. Not connection electrofusion fittings and pipes .
    Solution: 1.Repeat the welding with another electrofusion fitting. 2. Troubleshoot the short circuit of connecting cable. 3. Reconnect the electrofusion fittings and pipes.  
    Error # 41-————-Ambient Temperature is too high
    Probable Cause: The ambient temperature is higher than 50°C.
    Solution: Protect the working site where the welding is taking place in order to reach an ambient temperature within the allowable limits.
    Error # 42 -————-Transformer Overheated (during welding)
    Error # 43 -————- Silicon Controlled Rectifier Overheated (during welding)
    Probable Cause: Continuous working and welding big size of electrofusion fittings. The temperature of the transformer is too high.
    Solution: Waiting the machine has cooled off and then repeat the welding
    Error # 51 -————-Power source frequency is too high or low
    Error # 52-———— Power source voltage is too high
    Error # 53-————Power source voltage is too low
    Probable Cause: The power source does not meet requirements.
    Solution: Using the power source meet requirements.
    Run Feedback
    Error # 200 -————short circuit
    Probable Cause: 1.Electrofusion Fitting is damage.
    Solution: Repeat the welding with another electrofusion fitting.
    Error #201-———– Resistance of electrofusion fittings become smaller , stop welding
    Error #202-———– Resistance of electrofusion fittings become bigger , stop welding
    Probable Cause: 1.Electrofusion Fitting is damage. 2. The electrofusion fitting parameters have changed to much , which is beyond the applicable scope of electrofusion machine.
    Solution: Repeat the welding with another electrofusion fitting if just the electrofusion fitting damage.
            You should change other brand if electrofusion fitting parameters have changed to much.
    Error # 205 -———–Silicon Controlled Rectifier Overheated, stop welding
    Error # 206-————Transformer Overheated , stop welding
    Probable Cause: Welding current is too heavy
    Solution: Waiting the machine has cooled off and then repeat the welding

    Maintenance Instructions & Warranty Agreement
    Maintenance of the equipment by professional;
    Clean dust and sundries on the components;
    Check the equipment grounding whether in good or safe condition;
    Detection of high-current connection point is in good contact condition, without exception; check other wiring points loose or not;
    The equipment which equipped with large-capacity capacitor, check the temperature of the capacitor and check the leakage, bulge phenomenon of the external surface;
    When not using the equipment for a long time, you should cut off the power supply.
    Device is guaranteed for 12 months against any failure or damage of the device under normal operation.
    The warranty period starts from the date of delivery.
    Service in following situations will be charged, even if it is within the warranty period:
    Damages from fire, water disasters or abnormal voltage
    Damage from operation for non-supported functions.
    Failures from operation that is not under the guidance
    Be sure to keep the sheet, and show it to servicing personnel.
    The service charge will be calculated according to actual expenses, unless otherwise specified in the contract.
    Should you have any questions regarding warranty, service, contact our agent or our company.

    FAQ

    Q1. Are you manufacturer or trading company ?
    A: We are manufacturer. Our factory Hangzhou Fuyi Tools Co.,Ltd professional produce socket fusion welding machines, sockets and the tools for PPR/HDPE pipes and fittings. You can check our company name in China government website. Or by checking FUYI TOOLS brand in China trademark website, after checking you will find FUYI TOOLS is really the manufacturer. 

    Q2. What about the lead time for socket fusion welding machines ?
    A. If we have stock , 2 days can delivery out. Mass production time about 15 days. 

    Q3. Can you design and produce special socket fusion machines according to customer requirement ? 
    A: Yes , we have design and technical team. The designers always use Auto CAD , Keil uVision5 , Altium Designer etc and 3D printer, so we can design or according to your drawing to make samples and producing. 

    Q4. Do you have any MOQ for OEM orders on PPR Welding Machines ?
    A: Our factory have laser machine , we can laser your logo on the welding machine. So without any requirement on quantities. 
      
    Q5: Do you offer guarantee for socket fuson welding machines ?
    A: Yes, we provide standard 3 years warranty, not including quick-worn parts, still provide service after warranty.

    factory tour


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us