The socket fusion welding machine for joining pipes and fittings.

There are two series in our factory. One is constant temperature socket fusion welding machine , set temperature 260°C , it’s for fusion welding PPR pipes and fittings.

The other is digital socket fusion welding machine. You can according to different thermoplastics pipes and fittings to adjust the temperature by yourself. It’s for joining PP-R , PE, PB, PVDF pipes and fittings.

The suggestion temperature for below pipes

PP-R    260°C

PB      240°C

HDPE   220°C

PVDF   172°C

There are “RDY” and “HEAT” Indicator lamp in the machine.

HEAT that meaning heating , you should wait. When the LED in on red in machine must be heating up to the maximum working temperature.

RDY that meaning ready , you can start to work after RDY light is green.

FUYI TOOLS digital socket fusion welding machine advantage

1. Using algorithm PID Microcontroller , temperature control system can react faster to the external temperature fluctuations.

2. Independent research and development automatic testing line to insure the temperature tolerance ≤ 2°C.

3. There is circuit board research and development department in our factory. There are STM lines in our factory.

4.In case the intelligent control device failure, there is the warning temperature. The warning temperature is based on setting temperature plus 30°C. ( For example , if your setting temperature is 260°C , the warning temperature is 290°C).

How to use digital socket fusion welding machine

1.Setting Temperature

    Choose suitable pipe and fittings , set the suitable temperature

2.Cutting the pipe

   Cutting the necessary pipe length with the plastic pipe cutter.

3.Cleaning the pipe

   Cleaning the fusion surface of pipe with alcohol

4.Measuring Fusion Depth

   Fusion depth in pad from 16mm to 160mm . You can mark or draw the line by hole in pad.

5.Heating

   Insert the pipe and fitting horizontally into the sockets. Heating time reference to instruction book in the kit. 

6.Connecting and cooling

   Connect the heated pipe and fitting exactly and adjust finish in 5s.